The system consists of a main central unit and lighting units.
The main central unit receives information from the lighting units (status, input states, output states) and sends the information to the lighting units (output states) according to the control algorithms defined by the user.
The lighting unit converts the control information from the central unit into the output states.
The two-wire power and control bus is 48VDC to increase the total power supply capacity in the system.
The lighting units have five PWM 24VDC outputs. This allows bright and powerful luminaires to be connected.
The lighting units have several dry contact inputs for connecting push buttons and traditional switches. The devices also have a separate 12 VDC output for powering various sensors (PIR, proximity, presence, touch) without dimming (on/off only).
The system is a devices and software for creating a universal lighting system for rooms and/or furniture.
Power supply, one central unit and several lighting units.
Luminaires, switches and sensors are connected to the lighting units. Any luminaire can be controlled from any switch or sensor in the system by a previously created program.
Voltage: 48V DC
Maximum power in continuous operation mode: 400W
Required: 18 AWG double stranded wire
Input voltage: 90-305V AC 60Hz
Output voltage: 48V DC
Maximum output power: 480W
PF > 0.98 (115V AC)
Service life: min 62,000 hours (7 years)
Operating acoustic noise: less than 15 dB
Degree of protection against dust and water: IP67
Safety functions with restoration of operability:
- Overload
- Short circuit
- Overheating
- Input overvoltage
Bus voltage: 48V DC
Maximum input power: 120W
Output
Voltage for all channels: 24V with PWM (dimming for each channel is possible)
PWM frequency: 1250Hz
Maximum long-term power for each channel:
• one channel use = 100W
• two channels simultaneously use = 50W
• three channels simultaneously use = 40W
• four channels simultaneously use = 30W
• five channels simultaneously use = 24W
Each output can function as a mechanical switch equivalent for external AC relays. For example, to control traditional AC luminaires.
Input
Input channel: 3 (dry-contact)
The device can work with mechanical switches, buttons and sensors with different algorithms (control any selected lights in the network):
• Momentary: Push-for "ON" or Push-for "OFF".
• Toggle Switch: A flip switch with one state for "ON" and one state for "OFF".
• Edge Switch: Changes state on every hit.
• Activation Switch (for motion sensor): Any input turns "ON" and resets Auto OFF timer.
Wireless interfaces
No
General
Operating temperature: 40 to 115 °F
Storage temperature: -15 to 150 °F
Relative humidity: 0 to 95% non-condensing
Device power consumption: < 1 W
UL Listed option: No
Bus voltage: 48V DC
Maximum power: < 1W
Input
Input channel: 3 (dry-contact)
The device can work with mechanical switches, buttons and sensors with different algorithms (control any selected lights in the network):
• Momentary: Push-for "ON" or Push-for "OFF".
• Toggle Switch: A flip switch with one state for "ON" and one state for "OFF".
• Edge Switch: Changes state on every hit.
• Activation Switch (for motion sensor): Any input turns "ON" and resets Auto OFF timer.
Wire interfaces
• Modbus RS-485*
• DALI*
Wireless interfaces
• WiFi 4 (802.11 b/g/n) 2.4GHz
• Bluetooth Low Energy (BLE)*
• ZigBee*
Remote control
The system has its own web interface for control and configuration from any device in the home WiFi network (via a browser).The system can be integrated into custom Smart Home systems via various interfaces:
• MQTT
• web-API
Mobile app: no. The system is controlled via a browser.
The central unit is connected to the bus between the power supply and the bus.
General
Operating temperature: 40 to 115 °F
Storage temperature: -15 to 150 °F
Relative humidity: 0 to 95% non-condensing
Device power consumption: < 1 W
UL Listed option: No
==========
* - COMING SOON
Lighting unit:
• input bus pigtail: two wire 6-inches 18 AWG
• input bus connector: T-type 2-pins Wire Splice Connector
• input sensor connector: two 2-pin-0.1" connectors on the PCB
• output LED pigtail: 6-inches six wires 20 AWG with open-ended wires
Central unit:
• input bus pigtail: two wire 6-inches 18 AWG
• input bus connector: T-type 2-pins Wire Splice Connector
• input sensor connector: four 2-pin-0.1" PCB connectors
Power adapter:
• input pigtail: two wires with open-ended wires
• output pigtail: two wires with open-ended wires
Lighting unit:
• 2 x 2 x 1 inches (L x W x H)
• weight: 2.23 oz
Central unit:
• 2 x 2 x 1 inches (L x W x H)
• weight: 1.6 oz
Power supply:
• 11 x 5 x 2 inches (L x W x H)
• weight: 99 oz
